TEACHERS
GALLERY
PRICING
SIGN IN
TRY ZURU
GET STARTED
Loop
Audio
Interval:
5s
10s
15s
20s
60s
Play
1 of 24
Slide Notes
Download
Go Live
New! Free Haiku Deck for PowerPoint Add-In
Copy of Vex Robot Presentation
Share
Copy
Download
0
32
Published on Apr 03, 2016
No Description
View Outline
MORE DECKS TO EXPLORE
PRESENTATION OUTLINE
1.
The Team!
Photo by
'PixelPlacebo'
2.
NAWAKOT THE ASSISTANT
3.
JOSH The Co Leader
4.
Rafael The Leader!
5.
What Were Building
THE ROBOT THAT WE'RE BUILDING IS THE TUMBLER
6.
Material
JOYSTICK,BATTERIES,JOYSTICK CONTROLLER,4 MICROCONTROLLERS,4 WHEELS,CORTEX,4 MOTOR SCREWS, ELECTRICAL TAPE,12 1/2 INCH SCREWS,AND A 16 HOLE CHASSIS.
7.
The Controller Of All Robots
This is what we use to move it
8.
THE Wheels Of Movement
This makes the robot move😀
9.
Half Way
THIS IS WHEN WE WERE Almost done
10.
The Motors
We needed 4 motors for our robot
11.
Time to Get it married!
THIS IS THE PROCCES OF THE SYNCING/PAIRING/OF THE ROBOT
12.
FINISHING OUR ROBOT
WERE DONE!👍🏻
13.
Q's:What are we most proud of?
WERE MOST PROUD OF THE WORK THAT WE DID.WE DIDN'T Expect to even finish
Photo by
Telstar Logistics
14.
What was the hardest part?
The Hardest part was actually connecting the motors because they kept wobbling when testing
Photo by
The 621st Contingency Response Wing
15.
Did Our robot stay together?
Yes.Our robot stayed together while testing.
Photo by
⣫⣤⣇⣤
16.
Did we have any design Diffuculties?
Yes!We had to Switch motors,took off wheels twice,And had to rebuild the robot again once
Photo by
geishaboy500
17.
Why Is our design how it is?
The reason the motors are backward are because the wheels kept getting stuck.We kept switching the wheels but still didn't work until we switched the motors Around.
Photo by
Stuck in Customs
18.
Why did we choose this method for moving?
Because The wheels kept getting stuck so we had to move the motors around.A lot!
Photo by
photographphil
19.
Explaining Our Movement design.
WE ARE VERY SATISFIED ON HOW OUR ROBOT TURNED OUT.THE WHEELS WE USED WERE SMOOTH BUT KEPT GETTING STUCK SO WE PICKED DIFFERENT Wheels
Photo by
clickykbd
20.
What was the hardest part to put on.
The hardest part to put on was the motors because they wouldn't fit.😓
Photo by
The Slushey One
21.
WHAT WORKED BEST FOR SENSOR CONTROL.
The Cortex was a big problem for us it kept turning off when we were testing it.
Photo by
barnoid
22.
How does our robot know where it's going?
Because of The Joystick.Even thought it's inverted controls😓
Photo by
Bob Jagendorf
23.
How Did everything turn out?
EVERYTHING IN THE END WAS OKAY BUT IT WAS VERY COMPLICATED I'M sure it will go better soon.
Photo by
bottled_void
24.
Thanks For Watching!
😀
Photo by
@Doug88888
Rafael Rodriguez
×
Error!